Step deck · Steel frame / aluminium deckTrail King
Trail King
TK80ACS
A steel centre frame with aluminium decking and one drop behind the upper deck. Three published deck-height references keep tyre, clearance and tare differences visible.
Dimension intelligence
2 axles · fixedKnow the space. Know the limits.
A
Overall transport length47 ft 10 in14,580 mm
Documented spans Shared numeric scale
Spans compare documented values. They are not positioned or scaled to the photograph.
Manufacturer stated; loading condition not specified
View dimension source ↗- Main deck / well length (nominal)
- Not documented
- Overall transport length
- 47 ft 10 in / 14,580 mm · Manufacturer stated; loading condition not specified
- Overall / side-rail width
- 8 ft 6 in / 2,591 mm · Manufacturer stated; loading condition not specified
- Usable main deck / well length
- Not documented
- Usable support width
- Not documented
- Upper-deck length
- 10 ft / 3,048 mm · Manufacturer stated; loading condition not specified
- Rear-deck length
- Not documented
- Main-deck height
- 3 ft 2 in / 965 mm · loaded
- Ground clearance
- 1 ft 1 in / 330 mm · loaded
- Kingpin setback
- 1 ft 2 in / 356 mm · Manufacturer stated; loading condition not specified
- Swing clearance
- Not documented
- Coupler height
- Not documented
- Axle spacing
- 4 ft 2 in / 1,270 mm · Manufacturer stated; loading condition not specified
- Gooseneck length
- Not documented
- Main hydraulic tail length
- Not documented
- Deck transition drop
- Not documented
- Loading ramp length
- Not documented
- Tail fold-under length
- Not documented
Overall length is not usable deck length. A published side-rail width does not establish the unobstructed support width. Values above come from documentation, never from measuring the artwork.
Capacity with its conditions
Structural ratings do not approve axle loads, the tractor connection, route clearance or a permit.
What to verify
- Do not substitute the 80,000 lb distributed rating for the 60,000 lb rating over 10 ft.
- Confirm any portable ramps separately; the deck rating does not rate the loading equipment.
- Loading method
- Crane / forklift · Rear ramps if specified
- Axle arrangement
- Tandem
Manufacturer configuration detail
- Coupler adjustment range
- Published fifth-wheel height range: 48–50 in. No single coupler-height value is assumed.Manufacturer source ↗
- Deck construction
- Aluminium flooring with three flush apitong nailers over the steel frame.Manufacturer source ↗
Documentary statements retain their original conditions. Only unambiguous numeric fields enter dimensional checks.