Lowbed / double drop · SteelTrail King
Trail King
TK110HDG
A hydraulic detachable construction lowbed with a 25 ft 9 in main deck and three standard axles. Two kingpin positions alter the documented swing clearance.
Dimension intelligence
3 axles · hydraulic detachableKnow the space. Know the limits.
B
Main deck / well length (nominal)25 ft 9 in7,849 mm
Documented spans Shared numeric scale
Spans compare documented values. They are not positioned or scaled to the photograph.
Manufacturer stated; loading condition not specified
View dimension source ↗- Main deck / well length (nominal)
- 25 ft 9 in / 7,849 mm · Manufacturer stated; loading condition not specified
- Overall transport length
- Not documented
- Overall / side-rail width
- Not documented
- Usable main deck / well length
- Not documented
- Usable support width
- Not documented
- Upper-deck length
- Not documented
- Rear-deck length
- Not documented
- Main-deck height
- Not documented
- Ground clearance
- Not documented
- Kingpin setback
- 3 ft 4 in / 1,016 mm · Manufacturer stated; loading condition not specified
- Swing clearance
- 7 ft 2 in / 2,184 mm · Manufacturer stated; loading condition not specified
- Coupler height
- Not documented
- Axle spacing
- 4 ft 7 in / 1,397 mm · Manufacturer stated; loading condition not specified
- Gooseneck length
- 12 ft 11 in / 3,937 mm · Manufacturer stated; loading condition not specified
- Main hydraulic tail length
- Not documented
- Deck transition drop
- Not documented
- Loading ramp length
- Not documented
- Tail fold-under length
- Not documented
Overall length is not usable deck length. A published side-rail width does not establish the unobstructed support width. Values above come from documentation, never from measuring the artwork.
Capacity with its conditions
Structural ratings do not approve axle loads, the tractor connection, route clearance or a permit.
What to verify
- Confirm the selected kingpin location against tractor frame clearance.
- The source table does not state loaded deck height; measure or obtain a configuration drawing.
- Loading method
- Front detach
- Axle arrangement
- Fixed tridem; third lift
Manufacturer configuration detail
- Front approach
- Double-hinged front ramps supported on a reinforced ledge; confirm the installed ramp and load approach.Manufacturer source ↗
- Neck adjustment
- Seven adjustment positions provide a published 10 in fifth-wheel-height range; not an exact selected coupler height.Manufacturer source ↗
- Ride adjustment
- Manufacturer lists adjustable ride-height control for TK110HDG; loaded height still requires the selected setting.Manufacturer source ↗
Documentary statements retain their original conditions. Only unambiguous numeric fields enter dimensional checks.