Talbert
Drop Deck
A fixed-neck steel step deck with separate upper and lower loading areas. The record distinguishes distributed capacity from concentrated support conditions while leaving undocumented deck dimensions unknown.
Know the space. Know the limits.
Documented spans Shared numeric scale
Spans compare documented values. They are not positioned or scaled to the photograph.
Manufacturer stated; configuration reference
View dimension source ↗- Main deck / well length (nominal)
- Not documented
- Overall transport length
- Not documented
- Overall / side-rail width
- 8 ft 6 in / 2,591 mm · Manufacturer stated; configuration reference
- Usable main deck / well length
- Not documented
- Usable support width
- Not documented
- Upper-deck length
- 11 ft / 3,353 mm · Manufacturer stated; configuration reference
- Rear-deck length
- Not documented
- Main-deck height
- Not documented
- Ground clearance
- Not documented
- Kingpin setback
- 2 ft 6 in / 762 mm · Manufacturer stated; configuration reference
- Swing clearance
- Not documented
- Coupler height
- Not documented
- Axle spacing
- Not documented
- Gooseneck length
- Not documented
- Main hydraulic tail length
- Not documented
- Deck transition drop
- Not documented
- Loading ramp length
- Not documented
- Tail fold-under length
- Not documented
Overall length is not usable deck length. A published side-rail width does not establish the unobstructed support width. Values above come from documentation, never from measuring the artwork.
Capacity with its conditions
Structural ratings do not approve axle loads, the tractor connection, route clearance or a permit.
What to verify
- Obtain the actual build sheet and configuration-specific load chart.
- Published options and family ranges do not establish an individual trailer’s equipment.
- Loading method
- Winch / crane; verify loading procedure
- Axle arrangement
- Exact axle arrangement requires build confirmation
Manufacturer configuration detail
- Manufacturer detail
- Fixed GooseneckManufacturer source ↗
- Manufacturer detail
- 1-1/8 in. Shiplap Apitong FlooringManufacturer source ↗
- Manufacturer detail
- Construction: T1 and 80K BeamsManufacturer source ↗
- Manufacturer detail
- Winch Cable Pipe on Rear of GooseneckManufacturer source ↗
- Manufacturer detail
- 35-42 in. Loaded Deck HeightManufacturer source ↗
- Manufacturer detail
- One Pipe Pocket Each End of Rear Gooseneck PipeManufacturer source ↗
- Manufacturer detail
- Cable Roller with Spherical Bearings Between Gooseneck Mainbeams at Rear, Pin Pockets in Front of RollerManufacturer source ↗
Documentary statements retain their original conditions. Only unambiguous numeric fields enter dimensional checks.