Talbert
65SA Modular
A modular hydraulic-detachable heavy-haul configuration with a nominal 28 ft main deck and a 24 in deck-height reference. Axle modules and load support must be assessed as a complete configuration.

Know the space. Know the limits.

Documented spans Shared numeric scale
Spans compare documented values. They are not positioned or scaled to the photograph.
Manufacturer stated; configuration reference
View dimension source ↗- Main deck / well length (nominal)
- 28 ft / 8,534 mm · Manufacturer stated; configuration reference
- Overall transport length
- Not documented
- Overall / side-rail width
- 8 ft 6 in / 2,591 mm · Manufacturer stated; configuration reference
- Usable main deck / well length
- Not documented
- Usable support width
- Not documented
- Upper-deck length
- Not documented
- Rear-deck length
- Not documented
- Main-deck height
- 2 ft / 610 mm · loaded
- Ground clearance
- 6 in / 152 mm · loaded
- Kingpin setback
- Not documented
- Swing clearance
- 10 ft / 3,048 mm · Manufacturer stated; configuration reference
- Coupler height
- Not documented
- Axle spacing
- Not documented
- Gooseneck length
- Not documented
- Main hydraulic tail length
- Not documented
- Deck transition drop
- Not documented
- Loading ramp length
- Not documented
- Tail fold-under length
- Not documented
Overall length is not usable deck length. A published side-rail width does not establish the unobstructed support width. Values above come from documentation, never from measuring the artwork.
Capacity with its conditions
No comparable payload rating is established by this reference. Obtain the configuration-specific load chart.
Structural ratings do not approve axle loads, the tractor connection, route clearance or a permit.
What to verify
- Obtain the actual build sheet and configuration-specific load chart.
- Published options and family ranges do not establish an individual trailer’s equipment.
- Loading method
- Front detach
- Axle arrangement
- Exact axle arrangement requires build confirmation
Manufacturer configuration detail
- Manufacturer detail
- Non-Ground Bearing Gooseneck DesignManufacturer source ↗
- Manufacturer detail
- 120 in. Swing Radius with Connections for up to 70 in. Gooseneck ExtensionManufacturer source ↗
- Manufacturer detail
- 41 in. Mainbeam / 37 in. Bolster HeightManufacturer source ↗
- Manufacturer detail
- 28 ft. 0 in. Deck LengthManufacturer source ↗
- Manufacturer detail
- 12 in. Swinging / Removable OutriggersManufacturer source ↗
- Manufacturer detail
- Spring Parking Brake on Axle TwoManufacturer source ↗
- Manufacturer detail
- Up to 5 Axles Close Couple and 3+2 E2NitroTM Spread CapableManufacturer source ↗
- Manufacturer detail
- 24 in. Loaded Deck Height / 6 in. Loaded Road ClearanceManufacturer source ↗
- Manufacturer detail
- Removable Axles (RA / Modular)Manufacturer source ↗
- Manufacturer detail
- 2 in. Apitong FlooringManufacturer source ↗
- Manufacturer detail
- 130,000 lb. Capacity in 14 ft (5) AxleManufacturer source ↗
- Manufacturer detail
- Close Coupled or 3+2 Spread AxleManufacturer source ↗
Documentary statements retain their original conditions. Only unambiguous numeric fields enter dimensional checks.