Talbert
60FG
A fixed-gooseneck oil-field trailer with standard and alternate swing-clearance references. Distributed and concentrated capacities retain separate support conditions, and the neck setting must match the tractor configuration.
Know the space. Know the limits.
Documented spans Shared numeric scale
Spans compare documented values. They are not positioned or scaled to the photograph.
Manufacturer stated; configuration reference
View dimension source ↗- Main deck / well length (nominal)
- Not documented
- Overall transport length
- Not documented
- Overall / side-rail width
- 8 ft 6 in / 2,591 mm · Manufacturer stated; configuration reference
- Usable main deck / well length
- Not documented
- Usable support width
- Not documented
- Upper-deck length
- Not documented
- Rear-deck length
- Not documented
- Main-deck height
- Not documented
- Ground clearance
- Not documented
- Kingpin setback
- Not documented
- Swing clearance
- 9 ft / 2,743 mm · Manufacturer stated; configuration reference
- Coupler height
- Not documented
- Axle spacing
- Not documented
- Gooseneck length
- Not documented
- Main hydraulic tail length
- Not documented
- Deck transition drop
- Not documented
- Loading ramp length
- Not documented
- Tail fold-under length
- Not documented
Overall length is not usable deck length. A published side-rail width does not establish the unobstructed support width. Values above come from documentation, never from measuring the artwork.
Capacity with its conditions
Structural ratings do not approve axle loads, the tractor connection, route clearance or a permit.
What to verify
- Obtain the actual build sheet and configuration-specific load chart.
- Published options and family ranges do not establish an individual trailer’s equipment.
- Loading method
- Winch / crane; verify loading procedure
- Axle arrangement
- Exact axle arrangement requires build confirmation
Manufacturer configuration detail
- Manufacturer detail
- Fixed Gooseneck Narrow Type with High Arch ProfileManufacturer source ↗
- Manufacturer detail
- 108-in. Swing Radius with Alternate Setting at 96-in.Manufacturer source ↗
- Manufacturer detail
- Air Lift on Axle 4Manufacturer source ↗
- Manufacturer detail
- 35-42 in. Loaded Deck HeightManufacturer source ↗
- Manufacturer detail
- Cable Roller with Spherical Bearings Between Gooseneck Mainbeams at Rear, Pin Pockets in Front of RollerManufacturer source ↗
- Manufacturer detail
- Removable Plate Between Gooseneck Mainbeams to Walk onManufacturer source ↗
- Manufacturer detail
- Two Pair of Pipe Pockets Inside Side Beam FlangeManufacturer source ↗
- Manufacturer detail
- 2 in. Apitong FlooringManufacturer source ↗
- Manufacturer detail
- Axle Stops on Last Axle to Prevent Crushing when LoadingManufacturer source ↗
- Manufacturer detail
- Construction: T1 BeamsManufacturer source ↗
- Manufacturer detail
- Lightening Holes in Deck Side BeamsManufacturer source ↗
Documentary statements retain their original conditions. Only unambiguous numeric fields enter dimensional checks.