Fontaine
Traverse HT
A tandem hydraulic-tail equipment trailer with a 48 ft overall reference. The 10 ft main tail and separate 4 ft flip section are distinguished from the main deck; conflicting nominal deck-length wording remains qualified.
Know the space. Know the limits.
Documented spans Shared numeric scale
Spans compare documented values. They are not positioned or scaled to the photograph.
Nominal summary value (38 ft); detailed table says 38 ft 2 in. Confirm the build drawing for clear usable length.
View dimension source ↗- Main deck / well length (nominal)
- 38 ft / 11,582 mm · Nominal summary value (38 ft); detailed table says 38 ft 2 in. Confirm the build drawing for clear usable length.
- Overall transport length
- 48 ft / 14,630 mm · Transport overall length in manufacturer standard specifications
- Overall / side-rail width
- Not documented
- Usable main deck / well length
- Not documented
- Usable support width
- Not documented
- Upper-deck length
- Not documented
- Rear-deck length
- Not documented
- Main-deck height
- 2 ft 11 in / 889 mm · loaded
- Ground clearance
- Not documented
- Kingpin setback
- Not documented
- Swing clearance
- Not documented
- Coupler height
- Not documented
- Axle spacing
- Not documented
- Gooseneck length
- Not documented
- Main hydraulic tail length
- 10 ft / 3,048 mm · Main hydraulic tail only; separate 4 ft flip section gives 14 ft combined ramp length
- Deck transition drop
- Not documented
- Loading ramp length
- Not documented
- Tail fold-under length
- Not documented
Overall length is not usable deck length. A published side-rail width does not establish the unobstructed support width. Values above come from documentation, never from measuring the artwork.
Capacity with its conditions
No comparable payload rating is established by this reference. Obtain the configuration-specific load chart.
Structural ratings do not approve axle loads, the tractor connection, route clearance or a permit.
What to verify
- Rating basis: 40 tons evenly distributed
- Manufacturer summary gives a nominal 38 ft deck, while its detailed table states 38 ft 2 in; neither is silently substituted for a verified usable loading envelope.
- Match the selected deck, neck and axle configuration to the actual build sheet.
- Read the complete capacity and support conditions at the source; a model-family rating is not automatically transferable.
- Loading method
- Hydraulic tail
- Axle arrangement
- Tandem air ride; manufacturer identifies this configuration as Air Ride Tandem
Manufacturer configuration detail
- Capacity
- 40 tons evenly distributedManufacturer source ↗
- Length
- 48' total lengthManufacturer source ↗
- Deck type
- Hydraulic TailManufacturer source ↗
- Deck length
- 38' 2" deck lengthManufacturer source ↗
- Loaded deck height/clearance
- 35" loaded deck height - 14' ramp length (10' main tail/4' flip tail)Manufacturer source ↗
Documentary statements retain their original conditions. Only unambiguous numeric fields enter dimensional checks.