BWS
Hydraulic Detachable Gooseneck H
The current BWS 55HDG3X H hydraulic detachable-gooseneck lowboy, documented at 53 ft overall, 102 in wide and equipped with three 25,000 lb axles.
What the documentation establishes
- Trailer family
- RGN / Detachable Gooseneck →
- Loading method
- Front detach
- Overall transport length
- 53 ftManufacturer-stated overall length · Source ↗
- Overall / side-rail width
- 8 ft 6 inManufacturer-stated overall width · Source ↗
A model name or nominal class does not establish usable payload. The rating conditions and build-specific questions below remain part of the selection.
Know the space. Know the limits.
Documented spans Shared numeric scale
Spans compare documented values. They are not positioned or scaled to the photograph.
Manufacturer-stated overall length
View dimension source ↗5 measurements to confirm
Request these values for the actual configuration. An absent value is not zero and does not establish a fit.
- Main deck / well length (nominal)
- Not documented
- Overall transport length
- 53 ft / 16,154 mm · Manufacturer-stated overall length
- Overall / side-rail width
- 8 ft 6 in / 2,591 mm · Manufacturer-stated overall width
- Usable main deck / well length
- Not documented
- Usable support width
- Not documented
- Upper-deck length
- Not documented
- Rear-deck length
- Not documented
- Main-deck height
- Not documented
- Ground clearance
- Not documented
- Kingpin setback
- Not documented
- Swing clearance
- Not documented
- Coupler height
- Not documented
- Axle spacing
- Not documented
- Gooseneck length
- Not documented
- Main hydraulic tail length
- Not documented
- Deck transition drop
- Not documented
- Loading ramp length
- Not documented
- Tail fold-under length
- Not documented
Overall length is not usable deck length. A published side-rail width does not establish the unobstructed support width. Values above come from documentation, not from image measurements.
Capacity with its conditions
No comparable payload rating is established by this reference. Obtain the configuration-specific load chart.
Structural ratings do not approve axle loads, the tractor connection, route clearance or a permit.
What to verify
- The exact redesign introduction date remains open.
- Obtain the exact BWS build sheet and configuration-specific load chart before matching a load.
- Do not infer payload, legal axle loading, production years or extension-state capacity from the family name.
- Loading method
- Front detach
- Axle arrangement
- Three 25,000 lb axles; this component rating is not a payload rating
Manufacturer configuration detail
- Axle equipment
- 3 × 25,000 lb axles. No payload is derived by summing component ratings.Manufacturer source ↗
Documentary statements retain their original conditions. Only unambiguous numeric fields enter dimensional checks.