Talbert
60SA-RC
A hydraulic-detachable raised-centre lowbed with a nominal 25 ft main deck. Load contact on the lower support areas must be checked against the raised central structure and actual build drawing.
What the documentation establishes
- Trailer family
- RGN / Detachable Gooseneck →
- Loading method
- Front detach
- Main deck / well length (nominal)
- 25 ftManufacturer stated; configuration reference · Source ↗
- Overall / side-rail width
- 8 ft 6 inManufacturer stated; configuration reference · Source ↗
- Ground clearance
- 6 inloaded · Source ↗
- Swing clearance
- 9 ftManufacturer stated; configuration reference · Source ↗
A model name or nominal class does not establish usable payload. The rating conditions and build-specific questions below remain part of the selection.
Know the space. Know the limits.
Documented spans Shared numeric scale
Spans compare documented values. They are not positioned or scaled to the photograph.
Manufacturer stated; configuration reference
View dimension source ↗5 measurements to confirm
Request these values for the actual configuration. An absent value is not zero and does not establish a fit.
- Main deck / well length (nominal)
- 25 ft / 7,620 mm · Manufacturer stated; configuration reference
- Overall transport length
- Not documented
- Overall / side-rail width
- 8 ft 6 in / 2,591 mm · Manufacturer stated; configuration reference
- Usable main deck / well length
- Not documented
- Usable support width
- Not documented
- Upper-deck length
- Not documented
- Rear-deck length
- Not documented
- Main-deck height
- Not documented
- Ground clearance
- 6 in / 152 mm · loaded
- Kingpin setback
- Not documented
- Swing clearance
- 9 ft / 2,743 mm · Manufacturer stated; configuration reference
- Coupler height
- Not documented
- Axle spacing
- Not documented
- Gooseneck length
- Not documented
- Main hydraulic tail length
- Not documented
- Deck transition drop
- Not documented
- Loading ramp length
- Not documented
- Tail fold-under length
- Not documented
Overall length is not usable deck length. A published side-rail width does not establish the unobstructed support width. Values above come from documentation, not from image measurements.
Capacity with its conditions
No comparable payload rating is established by this reference. Obtain the configuration-specific load chart.
Structural ratings do not approve axle loads, the tractor connection, route clearance or a permit.
What to verify
- Raised-centre geometry requires separate main-beam and side-rail heights; a single deck-height value is not used.
- Obtain the actual build sheet and configuration-specific load chart.
- Published options and family ranges do not establish an individual trailer’s equipment.
- Loading method
- Front detach
- Axle arrangement
- Exact axle arrangement requires build confirmation
Manufacturer configuration detail
- Manufacturer detail
- Non-Ground Bearing Gooseneck DesignManufacturer source ↗
- Manufacturer detail
- 108 in. Swing Radius (Other Lengths Optional)Manufacturer source ↗
- Manufacturer detail
- 25 ft. 0 in. Deck LengthManufacturer source ↗
- Manufacturer detail
- 22 in. Loaded Deck HeightManufacturer source ↗
- Manufacturer detail
- 41 in. Mainbeam / 37 in. Bolster HeightManufacturer source ↗
- Manufacturer detail
- 6 in. Loaded Road ClearanceManufacturer source ↗
- Manufacturer detail
- 12 in. Swinging / Removable OutriggersManufacturer source ↗
- Manufacturer detail
- Spring Parking Brake on Axle TwoManufacturer source ↗
- Manufacturer detail
- 4th Axle and 3+1 Spread CapableManufacturer source ↗
- Manufacturer detail
- 2 in. Apitong FlooringManufacturer source ↗
- Manufacturer detail
- Capacity: 120,000 lb. in ½ Deck LengthManufacturer source ↗
- Manufacturer detail
- Axles: 25,000 lb. CapacityManufacturer source ↗
Documentary statements retain their original conditions. Only unambiguous numeric fields enter dimensional checks.