Talbert
55SA TELE
A hydraulic-detachable telescoping lowbed with a 20 in deck-height reference. The record leaves unsupported extension dimensions unknown; obtain the selected extension position and load chart before assessing support.
Know the space. Know the limits.
Documented spans Shared numeric scale
Spans compare documented values. They are not positioned or scaled to the photograph.
Manufacturer stated; configuration reference
View dimension source ↗- Main deck / well length (nominal)
- Not documented
- Overall transport length
- Not documented
- Overall / side-rail width
- 8 ft 6 in / 2,591 mm · Manufacturer stated; configuration reference
- Usable main deck / well length
- Not documented
- Usable support width
- Not documented
- Upper-deck length
- Not documented
- Rear-deck length
- Not documented
- Main-deck height
- 1 ft 8 in / 508 mm · loaded
- Ground clearance
- 6 in / 152 mm · loaded
- Kingpin setback
- Not documented
- Swing clearance
- 7 ft 6 in / 2,286 mm · Manufacturer stated; configuration reference
- Coupler height
- Not documented
- Axle spacing
- Not documented
- Gooseneck length
- Not documented
- Main hydraulic tail length
- Not documented
- Deck transition drop
- Not documented
- Loading ramp length
- Not documented
- Tail fold-under length
- Not documented
Overall length is not usable deck length. A published side-rail width does not establish the unobstructed support width. Values above come from documentation, never from measuring the artwork.
Capacity with its conditions
No comparable payload rating is established by this reference. Obtain the configuration-specific load chart.
Structural ratings do not approve axle loads, the tractor connection, route clearance or a permit.
What to verify
- Obtain the actual build sheet and configuration-specific load chart.
- Published options and family ranges do not establish an individual trailer’s equipment.
- Loading method
- Front detach
- Axle arrangement
- Exact axle arrangement requires build confirmation
Manufacturer configuration detail
- Manufacturer detail
- Capacity: 110,000 lb. In a 14 ft. Two-Point Rigid Load Base (Deck Fully Retracted)Manufacturer source ↗
- Manufacturer detail
- 6 in. Loaded Road ClearanceManufacturer source ↗
- Manufacturer detail
- Capacity: 110,000 lb. In a Two-Point Rigid Load Base 4 ft. Less Than Extended Deck LengthManufacturer source ↗
- Manufacturer detail
- 1-1/2 in. Apitong FlooringManufacturer source ↗
- Manufacturer detail
- Hydraulic Removable GooseneckManufacturer source ↗
- Manufacturer detail
- Axle Capacity: 25,000 lb.Manufacturer source ↗
- Manufacturer detail
- 90 in. Swing Radius (114 in. with Gooseneck Extension)Manufacturer source ↗
- Manufacturer detail
- RIDEWELL Air Ride Suspension. 3rd and 4th Axles Can be Flipped or RemovedManufacturer source ↗
- Manufacturer detail
- Deck Lengths: 32 ft. 6 in., 34 ft. in., 38 ft. in., 42 ft. 6 in., 46 ft. 6 in., 50 ft. 6 in. and 54 ft. 0 in.Manufacturer source ↗
- Manufacturer detail
- 12 in. Swinging/Removable OutriggersManufacturer source ↗
- Manufacturer detail
- Connections Rear of Axle 3Manufacturer source ↗
- Manufacturer detail
- 3rd Axle Can Be Used in 3+1 SpreadManufacturer source ↗
Documentary statements retain their original conditions. Only unambiguous numeric fields enter dimensional checks.