Talbert
55SA-HX
A hydraulic-detachable lowbed with a nominal 26 ft main-deck reference. Conflicting manufacturer deck-height and ground-clearance statements are deliberately excluded from numeric fit checks.
Know the space. Know the limits.
Documented spans Shared numeric scale
Spans compare documented values. They are not positioned or scaled to the photograph.
Manufacturer stated; configuration reference
View dimension source ↗- Main deck / well length (nominal)
- 26 ft / 7,925 mm · Manufacturer stated; configuration reference
- Overall transport length
- Not documented
- Overall / side-rail width
- 8 ft 6 in / 2,591 mm · Manufacturer stated; configuration reference
- Usable main deck / well length
- Not documented
- Usable support width
- Not documented
- Upper-deck length
- Not documented
- Rear-deck length
- Not documented
- Main-deck height
- Not documented
- Ground clearance
- Not documented
- Kingpin setback
- Not documented
- Swing clearance
- Not documented
- Coupler height
- Not documented
- Axle spacing
- Not documented
- Gooseneck length
- Not documented
- Main hydraulic tail length
- Not documented
- Deck transition drop
- Not documented
- Loading ramp length
- Not documented
- Tail fold-under length
- Not documented
Overall length is not usable deck length. A published side-rail width does not establish the unobstructed support width. Values above come from documentation, never from measuring the artwork.
Capacity with its conditions
No comparable payload rating is established by this reference. Obtain the configuration-specific load chart.
Structural ratings do not approve axle loads, the tractor connection, route clearance or a permit.
What to verify
- Source conflict: overview states 20 in deck / 6 in clearance; specification table states 24 / 8 in. Both numeric fields are withheld pending confirmation.
- Obtain the actual build sheet and configuration-specific load chart.
- Published options and family ranges do not establish an individual trailer’s equipment.
- Loading method
- Front detach
- Axle arrangement
- Exact axle arrangement requires build confirmation
Manufacturer configuration detail
- Manufacturer detail
- Non-Ground Bearing Gooseneck DesignManufacturer source ↗
- Manufacturer detail
- 114/90 in. Dual Swing RadiusManufacturer source ↗
- Manufacturer detail
- 26 ft. 0 in. Deck LengthManufacturer source ↗
- Manufacturer detail
- 12 in. Swinging / Removable OutriggersManufacturer source ↗
- Manufacturer detail
- 40 in. Mainbeam / 36 in. Bolster HeightManufacturer source ↗
- Manufacturer detail
- 24 in. Loaded Deck Height / 8 in. Loaded Road ClearanceManufacturer source ↗
- Manufacturer detail
- Spring Parking Brake on Axle TwoManufacturer source ↗
- Manufacturer detail
- 4th Axle Capable with or without Axle ExtensionManufacturer source ↗
- Manufacturer detail
- 110,000 lb. Capacity in 1/2 Deck Length 110,000 lb. in 16ft. when 3+1Manufacturer source ↗
- Manufacturer detail
- Axles: 25,000 lb. CapacityManufacturer source ↗
- Manufacturer detail
- Air Lift 3rd Axle (Optional)Manufacturer source ↗
Documentary statements retain their original conditions. Only unambiguous numeric fields enter dimensional checks.