Talbert
55CC-RP
A hydraulic-detachable lowbed with documented overall and usable well lengths. Distributed and concentrated capacities are recorded separately so the support footprint remains part of equipment selection.
Know the space. Know the limits.
Documented spans Shared numeric scale
Spans compare documented values. They are not positioned or scaled to the photograph.
Manufacturer stated; configuration reference
View dimension source ↗- Main deck / well length (nominal)
- Not documented
- Overall transport length
- 52 ft 4 in / 15,951 mm · Manufacturer stated; configuration reference
- Overall / side-rail width
- 8 ft 6 in / 2,591 mm · Manufacturer stated; configuration reference
- Usable main deck / well length
- 23 ft 6 in / 7,163 mm · Manufacturer stated; configuration reference
- Usable support width
- Not documented
- Upper-deck length
- Not documented
- Rear-deck length
- Not documented
- Main-deck height
- 1 ft 10 in / 559 mm · loaded
- Ground clearance
- 6 in / 152 mm · loaded
- Kingpin setback
- Not documented
- Swing clearance
- 8 ft / 2,438 mm · Manufacturer stated; configuration reference
- Coupler height
- 4 ft 1 in / 1,245 mm · Manufacturer stated; configuration reference
- Axle spacing
- Not documented
- Gooseneck length
- Not documented
- Main hydraulic tail length
- Not documented
- Deck transition drop
- Not documented
- Loading ramp length
- Not documented
- Tail fold-under length
- Not documented
Overall length is not usable deck length. A published side-rail width does not establish the unobstructed support width. Values above come from documentation, never from measuring the artwork.
Capacity with its conditions
Structural ratings do not approve axle loads, the tractor connection, route clearance or a permit.
What to verify
- Obtain the actual build sheet and configuration-specific load chart.
- Published options and family ranges do not establish an individual trailer’s equipment.
- Loading method
- Front detach
- Axle arrangement
- Exact axle arrangement requires build confirmation
Manufacturer configuration detail
- Manufacturer detail
- Low-Profile HRG Gooseneck DesignManufacturer source ↗
- Manufacturer detail
- 12 in. Swinging/Removable OutriggersManufacturer source ↗
- Manufacturer detail
- 49 in. Loaded Fifth Wheel HeightManufacturer source ↗
- Manufacturer detail
- 96 in. Swing RadiusManufacturer source ↗
- Manufacturer detail
- Apitong Between Main BeamsManufacturer source ↗
- Manufacturer detail
- 4 Beam Roller Paver Deck DesignManufacturer source ↗
- Manufacturer detail
- Ride Height Control: Talbert +3/-3 ValveManufacturer source ↗
- Manufacturer detail
- 52 ft.- 4 in. Overall LengthManufacturer source ↗
- Manufacturer detail
- 22 in. Loaded Deck HeightManufacturer source ↗
- Manufacturer detail
- 6 in. Loaded Road ClearanceManufacturer source ↗
- Manufacturer detail
- Spring Brakes On 1 AxleManufacturer source ↗
- Manufacturer detail
- 1-1/2 in. Apitong FlooringManufacturer source ↗
Documentary statements retain their original conditions. Only unambiguous numeric fields enter dimensional checks.