Talbert
4053TA
A 53 ft traveling-axle reference with a 41 ft 6 in nominal lower deck and brochure-documented tandem axles. Conflicting upper-deck lengths are withheld until a build-specific drawing resolves them.
What the documentation establishes
- Trailer family
- Traveling / Sliding Axle →
- Loading method
- Sliding axle / tilting deck
- Main deck / well length (nominal)
- 41 ft 6 inManufacturer stated; configuration reference · Source ↗
- Overall transport length
- 53 ftManufacturer stated; configuration reference · Source ↗
- Overall / side-rail width
- 8 ft 6 inManufacturer stated; configuration reference · Source ↗
- Main-deck height
- 3 ftLoaded deck height for TA Series brochure configuration, PUB 230C (0220), page 1. Confirm tyre/suspension/build applicability; not an unloaded height. · Source ↗
A model name or nominal class does not establish usable payload. The rating conditions and build-specific questions below remain part of the selection.
Know the space. Know the limits.
Documented spans Shared numeric scale
Spans compare documented values. They are not positioned or scaled to the photograph.
Manufacturer stated; configuration reference
View dimension source ↗4 measurements to confirm
Request these values for the actual configuration. An absent value is not zero and does not establish a fit.
- Main deck / well length (nominal)
- 41 ft 6 in / 12,649 mm · Manufacturer stated; configuration reference
- Overall transport length
- 53 ft / 16,154 mm · Manufacturer stated; configuration reference
- Overall / side-rail width
- 8 ft 6 in / 2,591 mm · Manufacturer stated; configuration reference
- Usable main deck / well length
- Not documented
- Usable support width
- Not documented
- Upper-deck length
- Not documented
- Rear-deck length
- Not documented
- Main-deck height
- 3 ft / 914 mm · Loaded deck height for TA Series brochure configuration, PUB 230C (0220), page 1. Confirm tyre/suspension/build applicability; not an unloaded height.
- Ground clearance
- Not documented
- Kingpin setback
- Not documented
- Swing clearance
- 8 ft / 2,438 mm · Manufacturer stated; configuration reference
- Coupler height
- Not documented
- Axle spacing
- Not documented
- Gooseneck length
- Not documented
- Main hydraulic tail length
- Not documented
- Deck transition drop
- Not documented
- Loading ramp length
- Not documented
- Tail fold-under length
- Not documented
Overall length is not usable deck length. A published side-rail width does not establish the unobstructed support width. Values above come from documentation, not from image measurements.
Capacity with its conditions
Structural ratings do not approve axle loads, the tractor connection, route clearance or a permit.
What to verify
- Axle count and loaded deck height use the manufacturer-linked TA brochure (PUB 230C, 0220); verify the actual trailer build before relying on them.
- Source conflict: current product page states upper deck 11 ft 8 in; linked TA brochure states 11 ft 6 in. Upper deck length is withheld pending build-specific confirmation.
- Obtain the actual build sheet and configuration-specific load chart.
- Published options and family ranges do not establish an individual trailer’s equipment.
- Loading method
- Sliding axle / tilting deck
- Axle arrangement
- 2 traveling axles in TA Series brochure reference; confirm actual build
Manufacturer configuration detail
- Manufacturer detail
- Four Beam, T-1 & 80k ConstructionManufacturer source ↗
- Manufacturer detail
- 4 in. I-Beam Crossmembers on 9 in. CentersManufacturer source ↗
- Manufacturer detail
- 1 1/2 in. Apitong FlooringManufacturer source ↗
- Manufacturer detail
- Overall Length: 53 ft. 0 in.Manufacturer source ↗
- Manufacturer detail
- Keyhole Chain Slots in Side Beams and Deck Centerline; both on 36 in. CentersManufacturer source ↗
- Manufacturer detail
- Lower Deck Length: 41 ft. 6 in.Manufacturer source ↗
- Manufacturer detail
- Upper Deck Length: 11 ft. 8 in.Manufacturer source ↗
- Manufacturer detail
- 96-in. Swing RadiusManufacturer source ↗
- Manufacturer detail
- Large Capacity, Lockable Tool Box on Curb Side with Chain Rack, Updated Hardware and Door SealManufacturer source ↗
- Manufacturer detail
- Two Pair of Pipe Pockets Inside Side Beam FlangeManufacturer source ↗
- Manufacturer detail
- Axle Stops on Last Axle to Prevent Crushing when LoadingManufacturer source ↗
- Brochure axle configuration
- 2 axles; model-specific column in TA Series PUB 230C (0220), page 2.Manufacturer source ↗
- Upper deck source conflict
- Source conflict: current product page states upper deck 11 ft 8 in; linked TA brochure states 11 ft 6 in. Upper deck length is withheld pending build-specific confirmation.Manufacturer source ↗
Documentary statements retain their original conditions. Only unambiguous numeric fields enter dimensional checks.