Talbert
35HT
A fixed-neck hydraulic-tail trailer with a documented 12 ft tail. Loading geometry must be checked separately from transport deck height, and distributed and concentrated capacity remain distinct.
What the documentation establishes
- Trailer family
- Hydraulic Tail →
- Loading method
- Hydraulic tail
- Overall / side-rail width
- 8 ft 6 inManufacturer stated; configuration reference · Source ↗
- Main-deck height
- 3 ft 0.25 inloaded · Source ↗
- Ground clearance
- 1 ft 6.5 inloaded · Source ↗
- Coupler height
- 4 ft 1 inManufacturer stated; configuration reference · Source ↗
A model name or nominal class does not establish usable payload. The rating conditions and build-specific questions below remain part of the selection.
Know the space. Know the limits.
Documented spans Shared numeric scale
Spans compare documented values. They are not positioned or scaled to the photograph.
Manufacturer stated; configuration reference
View dimension source ↗6 measurements to confirm
Request these values for the actual configuration. An absent value is not zero and does not establish a fit.
- Main deck / well length (nominal)
- Not documented
- Overall transport length
- Not documented
- Overall / side-rail width
- 8 ft 6 in / 2,591 mm · Manufacturer stated; configuration reference
- Usable main deck / well length
- Not documented
- Usable support width
- Not documented
- Upper-deck length
- Not documented
- Rear-deck length
- Not documented
- Main-deck height
- 3 ft 0.25 in / 921 mm · loaded
- Ground clearance
- 1 ft 6.5 in / 470 mm · loaded
- Kingpin setback
- Not documented
- Swing clearance
- Not documented
- Coupler height
- 4 ft 1 in / 1,245 mm · Manufacturer stated; configuration reference
- Axle spacing
- 4 ft 1 in / 1,245 mm · Manufacturer stated; configuration reference
- Gooseneck length
- 9 ft 2 in / 2,794 mm · Manufacturer stated; configuration reference
- Main hydraulic tail length
- 12 ft / 3,658 mm · Manufacturer stated; configuration reference
- Deck transition drop
- Not documented
- Loading ramp length
- Not documented
- Tail fold-under length
- Not documented
Overall length is not usable deck length. A published side-rail width does not establish the unobstructed support width. Values above come from documentation, not from image measurements.
Capacity with its conditions
Structural ratings do not approve axle loads, the tractor connection, route clearance or a permit.
What to verify
- Obtain the actual build sheet and configuration-specific load chart.
- Published options and family ranges do not establish an individual trailer’s equipment.
- Loading method
- Hydraulic tail
- Axle arrangement
- Exact axle arrangement requires build confirmation
Manufacturer configuration detail
- Manufacturer detail
- 70,000 lb. Capacity Evenly Distributed 50,000 lbs. In 16 ft. 0 in. Load Concentration At 60 mphManufacturer source ↗
- Manufacturer detail
- 9 ft. 2 in. Gooseneck LengthManufacturer source ↗
- Manufacturer detail
- 25,000 lb. Axles With Oil SealsManufacturer source ↗
- Manufacturer detail
- 49 in. 5th Wheel HeightManufacturer source ↗
- Manufacturer detail
- Perimeter Frame Gooseneck DesignManufacturer source ↗
- Manufacturer detail
- Dual Toolboxes On Front Of GooseneckManufacturer source ↗
- Manufacturer detail
- Hydraulic Winch Located Top, Center, Front Of GooseneckManufacturer source ↗
- Manufacturer detail
- 49 in. Axle SpacingManufacturer source ↗
- Manufacturer detail
- Vertical Deck To Gooseneck Transition With Steel PlateManufacturer source ↗
- Manufacturer detail
- 36-1/4 in. Loaded Deck HeightManufacturer source ↗
- Manufacturer detail
- 18-1/2 in. Loaded Ground ClearanceManufacturer source ↗
- Manufacturer detail
- Dot Rubber Mounted Sealed Beam Lights With Modular HarnessManufacturer source ↗
Documentary statements retain their original conditions. Only unambiguous numeric fields enter dimensional checks.