Talbert
35 Ton Sloping Paver
A hydraulic-detachable paver-trailer reference with a tandem axle arrangement and sloping loading geometry. Low-clearance equipment needs an approach and breakover assessment using verified dimensions, not image measurements.
What the documentation establishes
- Trailer family
- RGN / Detachable Gooseneck →
- Loading method
- Front detach
- Axle spacing
- 4 ft 7 inManufacturer stated; configuration reference · Source ↗
A model name or nominal class does not establish usable payload. The rating conditions and build-specific questions below remain part of the selection.
Know the space. Know the limits.
Documented spans Shared numeric scale
Spans compare documented values. They are not positioned or scaled to the photograph.
Manufacturer stated; configuration reference
View dimension source ↗4 measurements to confirm
Request these values for the actual configuration. An absent value is not zero and does not establish a fit.
- Main deck / well length (nominal)
- Not documented
- Overall transport length
- Not documented
- Overall / side-rail width
- Not documented
- Usable main deck / well length
- Not documented
- Usable support width
- Not documented
- Upper-deck length
- Not documented
- Rear-deck length
- Not documented
- Main-deck height
- Not documented
- Ground clearance
- Not documented
- Kingpin setback
- Not documented
- Swing clearance
- Not documented
- Coupler height
- Not documented
- Axle spacing
- 4 ft 7 in / 1,397 mm · Manufacturer stated; configuration reference
- Gooseneck length
- Not documented
- Main hydraulic tail length
- Not documented
- Deck transition drop
- Not documented
- Loading ramp length
- Not documented
- Tail fold-under length
- Not documented
Overall length is not usable deck length. A published side-rail width does not establish the unobstructed support width. Values above come from documentation, not from image measurements.
Capacity with its conditions
No comparable payload rating is established by this reference. Obtain the configuration-specific load chart.
Structural ratings do not approve axle loads, the tractor connection, route clearance or a permit.
What to verify
- Obtain the actual build sheet and configuration-specific load chart.
- Published options and family ranges do not establish an individual trailer’s equipment.
- Loading method
- Front detach
- Axle arrangement
- Exact axle arrangement requires build confirmation
Manufacturer configuration detail
- Manufacturer detail
- Lighter tapered deck with a 5-foot slope fits most rollers, while the 1/4-inch steel floor plate combined with apitong flooring adds strength to the rear bridge.Manufacturer source ↗
- Manufacturer detail
- 70,000 lb. Capacity in 1/2 Deck LengthManufacturer source ↗
- Manufacturer detail
- Axles: (2) 25,000 lb. Capacity, Spacing: 55 in.Manufacturer source ↗
- Manufacturer detail
- 16-1/2 x 7 in air actuated with 2S/1M ABS and spring brakes on 1 axleManufacturer source ↗
- Manufacturer detail
- 12 in. Swinging / Removable OutriggersManufacturer source ↗
- Manufacturer detail
- RIDEWELL Suspension: Air Ride with ove ride chains on all axlesManufacturer source ↗
Documentary statements retain their original conditions. Only unambiguous numeric fields enter dimensional checks.