Talbert
30-55 HRG Double Drop
A hydraulic-detachable double drop with a nominal 29 ft main deck and an 18 in deck-height reference. The neck, approach and rear axle options must match the intended loading procedure and actual build.
Know the space. Know the limits.
Documented spans Shared numeric scale
Spans compare documented values. They are not positioned or scaled to the photograph.
Manufacturer stated; configuration reference
View dimension source ↗- Main deck / well length (nominal)
- 29 ft / 8,839 mm · Manufacturer stated; configuration reference
- Overall transport length
- Not documented
- Overall / side-rail width
- 8 ft 6 in / 2,591 mm · Manufacturer stated; configuration reference
- Usable main deck / well length
- Not documented
- Usable support width
- Not documented
- Upper-deck length
- Not documented
- Rear-deck length
- Not documented
- Main-deck height
- 1 ft 6 in / 457 mm · loaded
- Ground clearance
- 6 in / 152 mm · loaded
- Kingpin setback
- Not documented
- Swing clearance
- Not documented
- Coupler height
- Not documented
- Axle spacing
- Not documented
- Gooseneck length
- Not documented
- Main hydraulic tail length
- Not documented
- Deck transition drop
- Not documented
- Loading ramp length
- Not documented
- Tail fold-under length
- Not documented
Overall length is not usable deck length. A published side-rail width does not establish the unobstructed support width. Values above come from documentation, not from image measurements.
Capacity with its conditions
No comparable payload rating is established by this reference. Obtain the configuration-specific load chart.
Structural ratings do not approve axle loads, the tractor connection, route clearance or a permit.
What to verify
- 30–55 ton is a family range, not one exact trailer rating. Confirm the capacity model and load chart; do not interpolate.
- Obtain the actual build sheet and configuration-specific load chart.
- Published options and family ranges do not establish an individual trailer’s equipment.
- Loading method
- Front detach
- Axle arrangement
- Exact axle arrangement requires build confirmation
Manufacturer configuration detail
- Manufacturer detail
- Capacity: 30-55 TonManufacturer source ↗
- Manufacturer detail
- Full Capacity Evenly DistributedManufacturer source ↗
- Concentrated rating — source clarification needed
- The manufacturer statement contains inconsistent support-length units. Obtain the exact build load chart; no concentrated rating is assigned from this wording.Manufacturer source ↗
- Manufacturer detail
- Full Width Gooseneck Platform; 1-1/8 in. Shiplap Apitong, 3 Lashing Slots Each Side and Mud Flap SkirtsManufacturer source ↗
- Manufacturer detail
- Axles: 25,000 lb. CapacityManufacturer source ↗
- Manufacturer detail
- Deck Height: 18 in. LoadedManufacturer source ↗
- Manufacturer detail
- Road Clearance: 6 in. LoadedManufacturer source ↗
- Manufacturer detail
- Four-Beam Design (HRG/SRG)Manufacturer source ↗
- Manufacturer detail
- 1-1/2 in. Apitong Flooring Outside MainbeamsManufacturer source ↗
- Manufacturer detail
- Options: 3rd Axle (Removable or Fixed)Manufacturer source ↗
Documentary statements retain their original conditions. Only unambiguous numeric fields enter dimensional checks.