Fontaine
Xcalibur XTD5372
A three-axle telescoping step deck with 53 ft closed and 72 ft extended overall references. The upper and lower deck transition distinguishes it from a straight flatbed; ambiguous deck-length rows are withheld from fit checks.
Know the space. Know the limits.
Documented spans Shared numeric scale
Spans compare documented values. They are not positioned or scaled to the photograph.
extended state
View dimension source ↗- Main deck / well length (nominal)
- Not documented
- Overall transport length
- 72 ft / 21,946 mm · extended state
- Overall / side-rail width
- 8 ft 6 in / 2,591 mm · Manufacturer stated; loading condition not specified
- Usable main deck / well length
- Not documented
- Usable support width
- Not documented
- Upper-deck length
- Not documented
- Rear-deck length
- Not documented
- Main-deck height
- Not documented
- Ground clearance
- Not documented
- Kingpin setback
- Not documented
- Swing clearance
- Not documented
- Coupler height
- Not documented
- Axle spacing
- 5 ft / 1,524 mm · Manufacturer stated; loading condition not specified
- Gooseneck length
- Not documented
- Main hydraulic tail length
- Not documented
- Deck transition drop
- Not documented
- Loading ramp length
- Not documented
- Tail fold-under length
- Not documented
Overall length is not usable deck length. A published side-rail width does not establish the unobstructed support width. Values above come from documentation, never from measuring the artwork.
Capacity with its conditions
No comparable payload rating is established by this reference. Obtain the configuration-specific load chart.
Structural ratings do not approve axle loads, the tractor connection, route clearance or a permit.
What to verify
- Deck-height scope or source consistency requires review; do not derive a loaded-height result from the artwork or model name.
- Source conflict: deck-length row repeats 53–90 ft while the overall-length row identifies this product’s own range. Usable deck length is withheld.
- Match the selected deck, neck and axle configuration to the actual build sheet.
- Read the complete capacity and support conditions at the source; a model-family rating is not automatically transferable.
- Loading method
- Crane / forklift
- Axle arrangement
- 3
Manufacturer configuration detail
- Length
- 53 feet (closed) to 72 feet (open)Manufacturer source ↗
- Width
- 8 feet 6 inchesManufacturer source ↗
- Deck type
- Extendable DropdeckManufacturer source ↗
- Deck length
- 53 feet (closed) to 90 feet (open)Manufacturer source ↗
- Deck width
- 8 feet 6 inchesManufacturer source ↗
- Loaded deck height/clearance
- 49 inchesManufacturer source ↗
- Standard trailer axles
- 3Manufacturer source ↗
- Axle spread
- 60"Manufacturer source ↗
Documentary statements retain their original conditions. Only unambiguous numeric fields enter dimensional checks.