Fontaine
Renegade N14
A hydraulic-detachable tandem lowbed with a 50 ft overall reference and a documented usable well. Deck height remains unconfirmed in this record rather than being inferred from the model name.
What the documentation establishes
- Trailer family
- RGN / Detachable Gooseneck →
- Loading method
- Front detach
- Overall transport length
- 50 ftManufacturer stated; loading condition not specified · Source ↗
- Overall / side-rail width
- 8 ft 6 inManufacturer stated; loading condition not specified · Source ↗
- Usable main deck / well length
- 29 ft 2 inManufacturer stated; loading condition not specified · Source ↗
- Ground clearance
- 6 inloaded · Source ↗
A model name or nominal class does not establish usable payload. The rating conditions and build-specific questions below remain part of the selection.
Know the space. Know the limits.
Documented spans Shared numeric scale
Spans compare documented values. They are not positioned or scaled to the photograph.
Manufacturer stated; loading condition not specified
View dimension source ↗4 measurements to confirm
Request these values for the actual configuration. An absent value is not zero and does not establish a fit.
- Main deck / well length (nominal)
- Not documented
- Overall transport length
- 50 ft / 15,240 mm · Manufacturer stated; loading condition not specified
- Overall / side-rail width
- 8 ft 6 in / 2,591 mm · Manufacturer stated; loading condition not specified
- Usable main deck / well length
- 29 ft 2 in / 8,890 mm · Manufacturer stated; loading condition not specified
- Usable support width
- Not documented
- Upper-deck length
- Not documented
- Rear-deck length
- Not documented
- Main-deck height
- Not documented
- Ground clearance
- 6 in / 152 mm · loaded
- Kingpin setback
- Not documented
- Swing clearance
- 8 ft 6 in / 2,591 mm · Manufacturer stated; loading condition not specified
- Coupler height
- Not documented
- Axle spacing
- 4 ft 2 in / 1,270 mm · Manufacturer stated; loading condition not specified
- Gooseneck length
- Not documented
- Main hydraulic tail length
- Not documented
- Deck transition drop
- Not documented
- Loading ramp length
- Not documented
- Tail fold-under length
- Not documented
Overall length is not usable deck length. A published side-rail width does not establish the unobstructed support width. Values above come from documentation, not from image measurements.
Capacity with its conditions
No comparable payload rating is established by this reference. Obtain the configuration-specific load chart.
Structural ratings do not approve axle loads, the tractor connection, route clearance or a permit.
What to verify
- Deck-height scope or source consistency requires review; do not derive a loaded-height result from the artwork or model name.
- Rating basis: 30 tons in 16-foot length (2 or 3 axles) - GAWR and tire ratings determine legal loads - 35 tons evenly distributed 16-foot rigid 2-point load centered in deck
- Match the selected deck, neck and axle configuration to the actual build sheet.
- Read the complete capacity and support conditions at the source; a model-family rating is not automatically transferable.
- Loading method
- Front detach
- Axle arrangement
- 2
Manufacturer configuration detail
- Capacity
- 30 tons in 16-foot length (2 or 3 axles) - GAWR and tire ratings determine legal loads - 35 tons evenly distributed 16-foot rigid 2-point load centered in deckManufacturer source ↗
- Length
- 50 feet 0 inchesManufacturer source ↗
- Width
- 102 inches wideManufacturer source ↗
- Deck type
- Standard FLDManufacturer source ↗
- Deck length
- 29 feet 2 inches clear deck lengthManufacturer source ↗
- Deck width
- 8 feet 6 inchesManufacturer source ↗
- Loaded deck height/clearance
- 15 inches with 6 inches ground clearance at front and rear of deck - 14 inches with 5 inches ground clearance at center when fully loadedManufacturer source ↗
- Standard trailer axles
- 2Manufacturer source ↗
- Axle spread
- 50"Manufacturer source ↗
- Swing radius
- 102 inchesManufacturer source ↗
Documentary statements retain their original conditions. Only unambiguous numeric fields enter dimensional checks.