Fontaine
Renegade N12
A tandem-axle hydraulic-detachable lowbed with a 53 ft overall reference and a documented low deck profile. Overall length, usable well length and ground clearance are separate measurements in the specification record.
What the documentation establishes
- Trailer family
- RGN / Detachable Gooseneck →
- Loading method
- Front detach
- Overall transport length
- 53 ftManufacturer stated; loading condition not specified · Source ↗
- Overall / side-rail width
- 8 ft 6 inManufacturer stated; loading condition not specified · Source ↗
- Usable main deck / well length
- 32 ft 11 inManufacturer stated; loading condition not specified · Source ↗
- Main-deck height
- 1 ftloaded · Source ↗
A model name or nominal class does not establish usable payload. The rating conditions and build-specific questions below remain part of the selection.
Know the space. Know the limits.
Documented spans Shared numeric scale
Spans compare documented values. They are not positioned or scaled to the photograph.
Manufacturer stated; loading condition not specified
View dimension source ↗4 measurements to confirm
Request these values for the actual configuration. An absent value is not zero and does not establish a fit.
- Main deck / well length (nominal)
- Not documented
- Overall transport length
- 53 ft / 16,154 mm · Manufacturer stated; loading condition not specified
- Overall / side-rail width
- 8 ft 6 in / 2,591 mm · Manufacturer stated; loading condition not specified
- Usable main deck / well length
- 32 ft 11 in / 10,033 mm · Manufacturer stated; loading condition not specified
- Usable support width
- Not documented
- Upper-deck length
- Not documented
- Rear-deck length
- Not documented
- Main-deck height
- 1 ft / 305 mm · loaded
- Ground clearance
- 4 in / 102 mm · loaded
- Kingpin setback
- Not documented
- Swing clearance
- 7 ft / 2,134 mm · Manufacturer stated; loading condition not specified
- Coupler height
- Not documented
- Axle spacing
- 4 ft 2 in / 1,270 mm · Manufacturer stated; loading condition not specified
- Gooseneck length
- Not documented
- Main hydraulic tail length
- Not documented
- Deck transition drop
- Not documented
- Loading ramp length
- Not documented
- Tail fold-under length
- Not documented
Overall length is not usable deck length. A published side-rail width does not establish the unobstructed support width. Values above come from documentation, not from image measurements.
Capacity with its conditions
No comparable payload rating is established by this reference. Obtain the configuration-specific load chart.
Structural ratings do not approve axle loads, the tractor connection, route clearance or a permit.
What to verify
- Rating basis: 30 tons in 16-foot length - GAWR and tire ratings determine legal loads
- Match the selected deck, neck and axle configuration to the actual build sheet.
- Read the complete capacity and support conditions at the source; a model-family rating is not automatically transferable.
- Loading method
- Front detach
- Axle arrangement
- 2
Manufacturer configuration detail
- Capacity
- 30 tons in 16-foot length - GAWR and tire ratings determine legal loadsManufacturer source ↗
- Length
- 53 feet 0 inchesManufacturer source ↗
- Width
- 102 inches wideManufacturer source ↗
- Deck type
- Standard FLDManufacturer source ↗
- Deck length
- 32 feet 11 inches clear deck lengthManufacturer source ↗
- Deck width
- 8 feet 6 inchesManufacturer source ↗
- Loaded deck height/clearance
- 12 inches with 4 inch ground clearance (Fully Loaded)Manufacturer source ↗
- Standard trailer axles
- 2Manufacturer source ↗
- Axle spread
- 50"Manufacturer source ↗
- Swing radius
- 84 inchesManufacturer source ↗
Documentary statements retain their original conditions. Only unambiguous numeric fields enter dimensional checks.