What changes with the configuration
The beam, recessed and flat-deck references retain their own identities. An alternate swing-clearance option is not evidence that all dimensions, reactions or load ratings are unchanged.
RGN / Detachable Gooseneck · SteelFontaine
Fontaine
Magnitude 65
Five-axle heavy-haul references with a nominal 28 ft main deck and distinct beam, recessed and flat deck forms. An alternate swing-clearance reference keeps the neck option visible without assuming unchanged ratings.
What the documentation establishes
- Trailer family
- RGN / Detachable Gooseneck →
- Loading method
- Front detach
- Main deck / well length (nominal)
- 28 ftManufacturer reference summary; clear-length drawing still required · Source ↗
- Axle spacing
- 5 ftManufacturer stated; loading condition not specified · Source ↗
A model name or nominal class does not establish usable payload. The rating conditions and build-specific questions below remain part of the selection.
How to read this model
A heavy-haul family with several deck forms and documented axle/coupling variations. It needs a system-level comparison of the load, neck and rear group.
What controls the shortlist
Establish the load interface and tractor clearance before choosing by nominal class. Rear axle spacing is a geometric fact, not a determination of permissible axle load in a jurisdiction.
Questions for the build-sheet review
- What deck form and neck/swing-clearance option are required?
- Which component ratings control the complete combination?
- What support chart and axle analysis correspond to that assembly?
Compare with a purpose
Selection commentary is based on the documented references below. Check the selected source and its review date; commentary does not supply missing manufacturer values.
Read the selected manufacturer reference ↗Dimension intelligence
5 axles · hydraulic detachableKnow the space. Know the limits.
B
Main deck / well length (nominal)28 ft8,534 mm
Documented spans Shared numeric scale
Spans compare documented values. They are not positioned or scaled to the photograph.
Manufacturer reference summary; clear-length drawing still required
View dimension source ↗6 measurements to confirm
Request these values for the actual configuration. An absent value is not zero and does not establish a fit.
- Main deck / well length (nominal)
- 28 ft / 8,534 mm · Manufacturer reference summary; clear-length drawing still required
- Overall transport length
- Not documented
- Overall / side-rail width
- Not documented
- Usable main deck / well length
- Not documented
- Usable support width
- Not documented
- Upper-deck length
- Not documented
- Rear-deck length
- Not documented
- Main-deck height
- Not documented
- Ground clearance
- Not documented
- Kingpin setback
- Not documented
- Swing clearance
- Not documented
- Coupler height
- Not documented
- Axle spacing
- 5 ft / 1,524 mm · Manufacturer stated; loading condition not specified
- Gooseneck length
- Not documented
- Main hydraulic tail length
- Not documented
- Deck transition drop
- Not documented
- Loading ramp length
- Not documented
- Tail fold-under length
- Not documented
Overall length is not usable deck length. A published side-rail width does not establish the unobstructed support width. Values above come from documentation, not from image measurements.
Capacity with its conditions
No comparable payload rating is established by this reference. Obtain the configuration-specific load chart.
Structural ratings do not approve axle loads, the tractor connection, route clearance or a permit.
What to verify
- Deck-height scope or source consistency requires review; do not derive a loaded-height result from the artwork or model name.
- Rating basis: 65 tons in 16 ft as a 3+2 with gooseneck extension to 184
- Match the selected deck, neck and axle configuration to the actual build sheet.
- Read the complete capacity and support conditions at the source; a model-family rating is not automatically transferable.
- Loading method
- Front detach
- Axle arrangement
- 5 Total - 3 Trailer, 1 Intermediate Axle, 1 Rear Flip Axle
Manufacturer configuration detail
- Capacity
- 65 tons in 16 ft as a 3+2 with gooseneck extension to 184Manufacturer source ↗
- Deck type
- MBMDManufacturer source ↗
- Loaded deck height/clearance
- 24 inches Ground Clearance: 6 in.Manufacturer source ↗
- Standard trailer axles
- 5 Total - 3 Trailer, 1 Intermediate Axle, 1 Rear Flip AxleManufacturer source ↗
- Axle spread
- 60"Manufacturer source ↗
- Swing radius
- 114 inches and 102 inches (13 feet 10 inches overall gooseneck length) - NGBManufacturer source ↗
Documentary statements retain their original conditions. Only unambiguous numeric fields enter dimensional checks.