Commercial trailer reference catalogue

Trailers for the load.

Browse documented configurations by physical family and architecture. Empty families remain research guides until manufacturer records are published.

Specification library →

201 configurations · 132 models

Sort

Manufacturer references · Representative imagery · Price and availability require a seller listing.

trail king tk110hdg — front three-quarter

Heavy haul · Hydraulic RGN 4 views

Trail KingSteel

TK110HDG

16 in kingpin / standard tri-axle

A hydraulic detachable construction lowbed with a 25 ft 9 in main deck and three standard axles.

concentrated load rating110,000 lb

Over 12 ft of support

Nominal deck / well: 25 ft 9 in
Axle count: 3 axles
Gooseneck: Hydraulic detach
Construction: Steel

LoadingFront detach

Load applicationsExcavators · Dozers

Rating & build conditions

Load supported over 12 ft

Not documented for this reference: deck height, overall width. Obtain the exact build sheet.

Nominal deck / well: Manufacturer stated; loading condition not specified

Axle arrangement: Fixed tridem; third lift. Overall width is not usable support width. Confirm the actual build and load support.

Manufacturer source ↗

Full specifications View trailer

Open deck · Step deck 4 views

Trail KingSteel frame / aluminium deck

TK80ACS

34 in loaded deck / 17.5 in tyres

A steel centre frame with aluminium decking and one drop behind the upper deck.

concentrated load rating60,000 lb

Over 10 ft of support

Overall length: 47 ft 10 in
Deck height: 34 in
Axle count: 2 axles
Overall width: 102 in

LoadingCrane / forklift · Rear ramps if specified

Load applicationsStructural steel · Industrial skids

Rating & build conditions

Load supported over 10 ft

Deck height: loaded

Overall length: Manufacturer stated; loading condition not specified

Axle arrangement: Tandem. Overall width is not usable support width. Confirm the actual build and load support.

Manufacturer source ↗

Full specifications View trailer

manac darkwing aluminum flatbed — front three-quarter

Open deck · Flatbed 4 views

ManacAluminium

DARKWING Aluminum Flatbed

Manufacturer family reference

An aluminium straight-deck family with riveted main beams, three timber nailers and configuration-dependent capacities.

ConstructionAluminium

Manufacturer reference

Gooseneck: Fixed neck
Construction: Aluminium

LoadingCrane / forklift

Load applicationsStructural steel · Industrial skids

Rating & build conditions

A load rating has not been established for this reference. Verify the manufacturer’s build-specific rating before selection.

Not documented for this reference: deck length, deck height, overall width. Obtain the exact build sheet.

Axle arrangement: Not specified. Overall width is not usable support width. Confirm the actual build and load support.

Manufacturer source ↗

Full specifications View trailer

Fontaine Traverse HT, Traverse HT — rear three-quarter

Equipment loading · Hydraulic tail 4 views

FontaineSteel

Traverse HT

A tandem hydraulic-tail equipment trailer with a 48 ft overall reference.

Nominal deck / well38 ft

Manufacturer reference

Nominal deck / well: 38 ft
Deck height: 35 in
Main tail length: 10 ft
Axle count: 2 axles

LoadingHydraulic tail

Load applicationsExcavators · Tall machinery

Rating & build conditions

A load rating has not been established for this reference. Verify the manufacturer’s build-specific rating before selection.

Not documented for this reference: overall width. Obtain the exact build sheet.

Deck height: loaded

Nominal deck / well: Nominal summary value (38 ft); detailed table says 38 ft 2 in. Confirm the build drawing for clear usable length.

Axle arrangement: Tandem air ride; manufacturer identifies this configuration as Air Ride Tandem. Overall width is not usable support width. Confirm the actual build and load support.

Manufacturer source ↗

Full specifications View trailer

Talbert 4048TA, Manufacturer standard reference — rear three-quarter

Equipment loading · Traveling axle 4 views

TalbertSteel

4048TA

Fixed neck · standard reference

A 48 ft traveling-axle trailer with a 37 ft 2 in nominal lower deck.

concentrated load rating50,000 lb

Over 10 ft of support

Nominal deck / well: 37 ft 2 in
Deck height: 36 in
Axle count: 2 axles
Overall width: 102 in

LoadingSliding axle / tilting deck

Load applicationsPaving equipment · Wheel loaders

Rating & build conditions

Stated support length

Deck height: Loaded deck height for TA Series brochure configuration, PUB 230C (0220), page 1. Confirm tyre/suspension/build applicability; not an unloaded height.

Nominal deck / well: Manufacturer stated; configuration reference

Axle arrangement: 2 traveling axles in TA Series brochure reference; confirm actual build. Overall width is not usable support width. Confirm the actual build and load support.

Manufacturer source ↗

Full specifications View trailer

Open deck · Double drop 4 views

TalbertSteel

30-55 FG Double Drop

Fixed neck · standard reference

A fixed-gooseneck double drop with a nominal 29 ft main deck and an 18 in deck-height reference.

Nominal deck / well29 ft

Manufacturer reference

Nominal deck / well: 29 ft
Deck height: 18 in
Overall width: 102 in
Gooseneck: Fixed neck

LoadingWinch / crane; verify loading procedure

Load applicationsIndustrial skids · Crane components

Rating & build conditions

A load rating has not been established for this reference. Verify the manufacturer’s build-specific rating before selection.

Deck height: loaded

Nominal deck / well: Manufacturer stated; configuration reference

Axle arrangement: Exact axle arrangement requires build confirmation. Overall width is not usable support width. Confirm the actual build and load support.

Manufacturer source ↗

Full specifications View trailer

Doepker 55T Fixed Neck Single Drop Lowbed

Heavy haul · Fixed-neck lowbed 0 views

DoepkerSteel

55T Fixed Neck Single Drop Lowbed

Current manufacturer reference

A current Doepker 55-ton-class fixed-neck single-drop lowbed family, retained independently from the removable-gooseneck RG line.

ConstructionSteel

Manufacturer reference

Gooseneck: Fixed neck
Construction: Steel

LoadingRear loading / lift-on, depending on build

Load applicationsExcavators · Dozers

Rating & build conditions

A load rating has not been established for this reference. Verify the manufacturer’s build-specific rating before selection.

Not documented for this reference: deck length, deck height, overall width. Obtain the exact build sheet.

Axle arrangement: Configuration-specific heavy-haul running gear. Overall width is not usable support width. Confirm the actual build and load support.

Manufacturer source ↗

Full specifications View trailer

Heavy haul · Mechanical RGN 4 views

Trail KingSteel

70MG

Full-width mechanical neck

The published 70MG mechanical-gooseneck reference distinguishes a 60,000 lb concentrated rating from the model name.

concentrated load rating60,000 lb

Over 16 ft of support

Gooseneck: Mechanical detach
Construction: Steel

LoadingFront detach

Load applicationsExcavators · Paving equipment

Rating & build conditions

Load concentrated over 16 ft

Not documented for this reference: deck length, deck height, overall width. Obtain the exact build sheet.

Axle arrangement: Not specified. Overall width is not usable support width. Confirm the actual build and load support.

Manufacturer source ↗

Full specifications View trailer

Aspen 40 Ton Triaxle Folding Gooseneck Flip-Tail Roll Trailer

Equipment loading · Rear loading 0 views

AspenSteel

40 Ton Triaxle Folding Gooseneck Flip-Tail Roll Trailer

Current manufacturer reference

A documented Aspen P-Series triaxle roll trailer combining a folding/scissor gooseneck with a flip-tail loading system.

ConstructionSteel

Manufacturer reference

Axle count: 3 axles
Gooseneck: Mechanical detach
Construction: Steel

LoadingFolding / scissor gooseneck · Flip-tail loading

Load applicationsWheel loaders · Backhoes & telehandlers

Rating & build conditions

A load rating has not been established for this reference. Verify the manufacturer’s build-specific rating before selection.

Not documented for this reference: deck length, deck height, overall width. Obtain the exact build sheet.

Axle arrangement: Triaxle; exact spacing requires the build sheet. Overall width is not usable support width. Confirm the actual build and load support.

Manufacturer source ↗

Full specifications View trailer

Open deck · Scissorneck 0 views

DoepkerSteel

Energy Scissorneck

Current manufacturer reference

Doepker’s current energy-sector scissorneck family, using an articulated front neck for ground-loading work.

ConstructionSteel

Manufacturer reference

Gooseneck: Mechanical detach
Construction: Steel

LoadingFolding / scissor-neck ground loading

Load applicationsoilfield equipment · Industrial skids

Rating & build conditions

A load rating has not been established for this reference. Verify the manufacturer’s build-specific rating before selection.

Not documented for this reference: deck length, deck height, overall width. Obtain the exact build sheet.

Axle arrangement: Configuration-specific energy-sector running gear. Overall width is not usable support width. Confirm the actual build and load support.

Manufacturer source ↗

Full specifications View trailer

Heavy haul · Specialized system · extension · Extended 0 views

Trail KingSteel

Perimeter Expanding Frame

TK160 · 20 ft width

A TK160 perimeter-frame heavy-haul system that expands from 12 ft to 20 ft overall width.

concentrated load rating150,000 lb

Over 16 ft of support

Overall width: 240 in
Gooseneck: Fixed neck
Construction: Steel

LoadingPerimeter-frame loading

Load applicationsIndustrial skids · Tall machinery

Rating & build conditions

Load supported over 16 ft; confirm expanded-state conditions

Not documented for this reference: deck length, deck height. Obtain the exact build sheet.

Axle arrangement: Build sheet required. Overall width is not usable support width. Confirm the actual build and load support.

Manufacturer source ↗

Full specifications View trailer

Specialty · Schnabel 0 views

TemiskoSteel

Schnabel Blade Trailer

Current manufacturer system reference

Temisko Schnabel wind-blade transport system that supports the blade as a structural span for low hauling height and obstacle clearance.

ConstructionSteel

Manufacturer reference

Gooseneck: Fixed neck
Construction: Steel

LoadingWind blade carried between Schnabel support modules · Hydraulic lift for obstacle clearance

Load applicationswind blades · schnabel transport

Rating & build conditions

A load rating has not been established for this reference. Verify the manufacturer’s build-specific rating before selection.

Not documented for this reference: deck length, deck height, overall width. Obtain the exact build sheet.

Axle arrangement: Front and rear Schnabel support modules; axle groupings are build-specific. Overall width is not usable support width. Confirm the actual build and load support.

Manufacturer source ↗

Full specifications View trailer