A three-axle hydraulic-detachable lowbed with a 22 in deck-height reference and two documented usable-deck lengths. The shorter option is kept separate instead of inheriting the standard reference's rating.
The usable well, loaded height and neck clearance govern the starting configuration.
Loading path
Front detach
Front access depends on detaching and reconnecting the hydraulic neck. Review the approach, supporting ground and the machine’s lowest components with the actual operating procedure.
Supporting the load
Track or tyre contacts must sit on suitable structure inside the well. A nominal well length does not establish unobstructed support space.
Other configurations of this model
Compare the changes in height, coupling or extension state before switching references.
4 ft 6.5 in1,384 mm · Manufacturer stated; loading condition not specifiedSource ↗
Still needed from the build sheet
Main deck / well length (nominal)
Usable support width
Swing clearance
Ratings & support conditions
The exact build’s load chart is required. A model-family capacity range does not establish this configuration’s rating.
Tare, gross vehicle rating and structural load ratings describe different limits. None alone establishes allowable payload or legal axle loads.
Plan around the actual load
These applications identify what to investigate. Suitability depends on the transported assembly, support points and the selected trailer build.
Excavators
Will the stowed machine fit the well?
Track footprint length alone is insufficient. Record where the rollers react into the tracks, and check side rails, outriggers and the position of the machine centre of gravity.
Rating basis: 51 tons in 12-foot length - GAWR and tire ratings determine legal payloads
Documented optional configuration. Numeric ratings are withheld until the matching build-specific chart is confirmed.
Match the selected deck, neck and axle configuration to the actual build sheet.
Read the complete capacity and support conditions at the source; a model-family rating is not automatically transferable.
Equipment selection requires verified weights and ratings, load support, coupling and axle analysis, securement planning and route review. This reference is not engineering, permit or route-clearance approval.
