Workhorse 50
A three-axle hydraulic-detachable lowbed with standard 25 ft and optional 24 ft usable-deck references. The published concentrated rating stays attached to the documented standard configuration.
The usable well, loaded height and neck clearance govern the starting configuration.
Front access depends on detaching and reconnecting the hydraulic neck. Review the approach, supporting ground and the machine’s lowest components with the actual operating procedure.
Track or tyre contacts must sit on suitable structure inside the well. A nominal well length does not establish unobstructed support space.
Compare the changes in height, coupling or extension state before switching references.
Usable support space, nominal deck spans and the overall transport envelope remain separate measurements.
Documented spans Shared numeric scale
Spans compare documented values. They are not positioned or scaled to the photograph.
Manufacturer stated; loading condition not specified
View dimension source ↗Tare, gross vehicle rating and structural load ratings describe different limits. None alone establishes allowable payload or legal axle loads.
These applications identify what to investigate. Suitability depends on the transported assembly, support points and the selected trailer build.
Track footprint length alone is insufficient. Record where the rollers react into the tracks, and check side rails, outriggers and the position of the machine centre of gravity.
Check the cradle and the trailer together. The cradle may concentrate weight or raise the load enough to defeat the height benefit.
Locate the skid rails over suitable structure. Check whether levelling blocks, isolators or delicate equipment prohibit support at other points.
Equipment selection requires verified weights and ratings, load support, coupling and axle analysis, securement planning and route review. This reference is not engineering, permit or route-clearance approval.
