A mechanical-detachable tandem lowbed with documented overall and usable well lengths. The neck type distinguishes it from the N14; deck height is not inferred from the model number.
The neck arrangement and tractor approach are as important as the well dimensions.
Loading path
Front detach
Use the operating procedure for this mechanical neck. Confirm the tractor approach, roller or ramp arrangement and clearance throughout detachment and reconnection.
Supporting the load
Check the actual support length against the concentrated rating. A similar model name or interchangeable neck does not prove identical ratings.
Dimensions that govern this configuration
Usable support space, nominal deck spans and the overall transport envelope remain separate measurements.
H
Usable main deck / well length29 ft 2 in8,890 mm
Documented spans Shared numeric scale
Spans compare documented values. They are not positioned or scaled to the photograph.
Manufacturer stated; loading condition not specified
6 ft 9 in2,057 mm · Manufacturer stated; loading condition not specifiedSource ↗
Axle spacing
4 ft 2 in1,270 mm · Manufacturer stated; loading condition not specifiedSource ↗
Still needed from the build sheet
Main deck / well length (nominal)
Main-deck height
Gooseneck length
Kingpin setback
Usable support width
Ratings & support conditions
The exact build’s load chart is required. A model-family capacity range does not establish this configuration’s rating.
Tare, gross vehicle rating and structural load ratings describe different limits. None alone establishes allowable payload or legal axle loads.
Plan around the actual load
These applications identify what to investigate. Suitability depends on the transported assembly, support points and the selected trailer build.
Excavators
Will the stowed machine fit the well?
Track footprint length alone is insufficient. Record where the rollers react into the tracks, and check side rails, outriggers and the position of the machine centre of gravity.
Deck-height scope or source consistency requires review; do not derive a loaded-height result from the artwork or model name.
Rating basis: 30 tons in 16-foot length - GAWR and tire ratings determine legal loads - 35 tons evenly distributed
Match the selected deck, neck and axle configuration to the actual build sheet.
Read the complete capacity and support conditions at the source; a model-family rating is not automatically transferable.
Equipment selection requires verified weights and ratings, load support, coupling and axle analysis, securement planning and route review. This reference is not engineering, permit or route-clearance approval.
