Trail King
Paver Special
A low-angle paver-loading family based on TK102HDG and TK110HDG engineering, with separate capacity references retained by parent model.
What the documentation establishes
- Trailer family
- RGN / Detachable Gooseneck →
- Loading method
- Front detach · Low-angle paver loading
- Main-deck height
- 1 ft 10 inManufacturer-stated deck height; load state not specified · Source ↗
A model name or nominal class does not establish usable payload. The rating conditions and build-specific questions below remain part of the selection.
Know the space. Know the limits.
Documented spans Shared numeric scale
Spans compare documented values. They are not positioned or scaled to the photograph.
Manufacturer-stated deck height; load state not specified
View dimension source ↗5 measurements to confirm
Request these values for the actual configuration. An absent value is not zero and does not establish a fit.
- Main deck / well length (nominal)
- Not documented
- Overall transport length
- Not documented
- Overall / side-rail width
- Not documented
- Usable main deck / well length
- Not documented
- Usable support width
- Not documented
- Upper-deck length
- Not documented
- Rear-deck length
- Not documented
- Main-deck height
- 1 ft 10 in / 559 mm · Manufacturer-stated deck height; load state not specified
- Ground clearance
- Not documented
- Kingpin setback
- Not documented
- Swing clearance
- Not documented
- Coupler height
- Not documented
- Axle spacing
- Not documented
- Gooseneck length
- Not documented
- Main hydraulic tail length
- Not documented
- Deck transition drop
- Not documented
- Loading ramp length
- Not documented
- Tail fold-under length
- Not documented
Overall length is not usable deck length. A published side-rail width does not establish the unobstructed support width. Values above come from documentation, not from image measurements.
Capacity with its conditions
Structural ratings do not approve axle loads, the tractor connection, route clearance or a permit.
What to verify
- The two parent-model ratings are not interchangeable.
- Deck height is retained with its source condition and not treated as loaded unless confirmed.
- Loading method
- Front detach · Low-angle paver loading
- Axle arrangement
- Build sheet required
Manufacturer configuration detail
- Loading angle
- Manufacturer states an 11° load angle.Manufacturer source ↗
Documentary statements retain their original conditions. Only unambiguous numeric fields enter dimensional checks.