An aluminium straight-deck family with riveted main beams, three timber nailers and configuration-dependent capacities. The manufacturer describes a dimensional range rather than one complete standard trailer.
Selected configuration · Manufacturer family reference
Choose by the documented loading system and configuration notes first. Request a dimensioned build drawing before comparing this model with a measured load.
A model name or nominal class does not establish usable payload. The rating conditions and build-specific questions below remain part of the selection.
An aluminium straight-deck product family for buyers prioritizing a continuous platform and side/overhead access. Construction, floor attachment and the selected axle arrangement are useful starting questions.
What changes with the configuration
The manufacturer family reference describes a dimensional range and construction features rather than one complete standard build. Missing fixed dimensions must not be filled by choosing convenient endpoints from that range.
What controls the shortlist
Get the actual order sheet before using the family in a measured fit comparison. Timber nailers, deck surface and frame load paths should be checked together for concentrated or unusually supported freight.
Questions for the build-sheet review
Which dimensions and axle arrangement were ordered?
What concentrated load and floor-support conditions are documented?
How are the cargo restraints and timber nailers intended to be used?
Selection commentary is based on the documented references below. Check the selected source and its review date; commentary does not supply missing manufacturer values.
Representative configuration image · not a scale drawing
B
Main deck / well length (nominal)Not documentedConfiguration-specific measurement required
The reference does not establish this measurement.
7 measurements to confirm
Request these values for the actual configuration. An absent value is not zero and does not establish a fit.
Main deck / well length (nominal)
Not documented
Overall transport length
Not documented
Overall / side-rail width
Not documented
Usable main deck / well length
Not documented
Usable support width
Not documented
Upper-deck length
Not documented
Rear-deck length
Not documented
Main-deck height
Not documented
Ground clearance
Not documented
Kingpin setback
Not documented
Swing clearance
Not documented
Coupler height
Not documented
Axle spacing
Not documented
Gooseneck length
Not documented
Main hydraulic tail length
Not documented
Deck transition drop
Not documented
Loading ramp length
Not documented
Tail fold-under length
Not documented
Overall length is not usable deck length. A published side-rail width does not establish the unobstructed support width. Values above come from documentation, not from image measurements.
Ratings & weights
Capacity with its conditions
No comparable payload rating is established by this reference. Obtain the configuration-specific load chart.
Structural ratings do not approve axle loads, the tractor connection, route clearance or a permit.
Configuration notes
What to verify
Published length range 28–53 ft and width range 96–102 in. No exact combined configuration is asserted.
Single through eight-axle options are described; select the actual build before analysis.
Obtain the order-specific length, width and concentrated rating.
A stake-pocket working load limit is not a trailer payload rating.
Loading method
Crane / forklift
Axle arrangement
Not specified
Manufacturer configuration detail
Family length range
28–53 ft overall family range. It does not identify the length of an individual trailer.Manufacturer source ↗
Family width range
96–102 in family range; actual overall and usable support widths require the build sheet.Manufacturer source ↗
Floor structure
Structural aluminium floor extrusion with three apitong nailers.Manufacturer source ↗
