TK160 · 12 ft width
A TK160 perimeter-frame heavy-haul system that expands from 12 ft to 20 ft overall width.
The selected open or closed state belongs with its own dimensions and rating chart.
Establish the required extension, locking position and loading sequence using the manufacturer’s procedure. Check the trailer in its transport state after loading.
An open telescoping span is not necessarily continuous flooring. Confirm the cargo’s permitted support positions and the extension-specific chart.
Compare the changes in height, coupling or extension state before switching references.
Usable support space, nominal deck spans and the overall transport envelope remain separate measurements.
The reference does not establish this measurement.
Tare, gross vehicle rating and structural load ratings describe different limits. None alone establishes allowable payload or legal axle loads.
These applications identify what to investigate. Suitability depends on the transported assembly, support points and the selected trailer build.
Locate the skid rails over suitable structure. Check whether levelling blocks, isolators or delicate equipment prohibit support at other points.
Check the cradle and the trailer together. The cradle may concentrate weight or raise the load enough to defeat the height benefit.
Equipment selection requires verified weights and ratings, load support, coupling and axle analysis, securement planning and route review. This reference is not engineering, permit or route-clearance approval.