Manac
COBRA Aluminium End Dump
An aluminium end-dump body on a steel-frame arrangement. Inside body width, sidewall height and overall width describe different boundaries; discharge and site suitability require the actual hoist and body specification.
What the documentation establishes
- Trailer family
- End Dump →
- Loading method
- Top loading / rear tipping discharge
- Overall / side-rail width
- 8 ft 6 inManufacturer base-model statement; actual order to be confirmed · Source ↗
A model name or nominal class does not establish usable payload. The rating conditions and build-specific questions below remain part of the selection.
Know the space. Know the limits.
Documented spans Shared numeric scale
Spans compare documented values. They are not positioned or scaled to the photograph.
Manufacturer base-model statement; actual order to be confirmed
View dimension source ↗6 measurements to confirm
Request these values for the actual configuration. An absent value is not zero and does not establish a fit.
- Main deck / well length (nominal)
- Not documented
- Overall transport length
- Not documented
- Overall / side-rail width
- 8 ft 6 in / 2,591 mm · Manufacturer base-model statement; actual order to be confirmed
- Usable main deck / well length
- Not documented
- Usable support width
- Not documented
- Upper-deck length
- Not documented
- Rear-deck length
- Not documented
- Main-deck height
- Not documented
- Ground clearance
- Not documented
- Kingpin setback
- Not documented
- Swing clearance
- Not documented
- Coupler height
- Not documented
- Axle spacing
- Not documented
- Gooseneck length
- Not documented
- Main hydraulic tail length
- Not documented
- Deck transition drop
- Not documented
- Loading ramp length
- Not documented
- Tail fold-under length
- Not documented
Overall length is not usable deck length. A published side-rail width does not establish the unobstructed support width. Values above come from documentation, not from image measurements.
Capacity with its conditions
No comparable payload rating is established by this reference. Obtain the configuration-specific load chart.
Structural ratings do not approve axle loads, the tractor connection, route clearance or a permit.
What to verify
- Production-year range is not established by this source.
- This manufacturer reference does not establish seller stock or availability.
- Confirm the serial-number build, installed equipment and condition before purchase.
- Product-line options do not establish a complete individual trailer; request the exact order sheet.
- Loading method
- Top loading / rear tipping discharge
- Axle arrangement
- Order-specific; confirm actual running gear
Manufacturer configuration detail
- Length range
- 28–45 ft across product lineManufacturer source ↗
- Inside body width
- 97 7/8 in; not overall widthManufacturer source ↗
- Sidewall-height range
- 60–84 in; not total transport heightManufacturer source ↗
- Coupler height range
- 48–50 in; selected order requiredManufacturer source ↗
Documentary statements retain their original conditions. Only unambiguous numeric fields enter dimensional checks.
Configuration status
This family is specifications-only. No configuration catalogue page is created until a stable, documented build is available.